Radon is a naturally occurring, colourless, and odourless radioactive gas produced by the radioactive decay of trace uranium found in UK granite rocks, limestone, and soils. As radon rises to the surface, it enters residential buildings through ground-floor construction gaps, timber floorboard voids, service penetrations, and micro-cracks in solid concrete slabs.
According to the UK Health Security Agency (UKHSA), radon is the second leading cause of lung cancer in the UK after smoking, accounting for over 1,100 deaths annually. For properties testing above the statutory Radon Action Level of 200 Bq/m³, installing a Positive Input Ventilation (PIV) system offers a proven, low-cost engineering remediation method.
How Positive Input Ventilation Displaces Soil Radon Gas
Houses naturally act as thermal chimneys: warm indoor air rises and escapes through the upper roof structure, creating a slight negative pressure zone (suction) at ground-floor level that pulls radon gas from the soil into living spaces.
A loft-mounted PIV unit counteracts this stack effect through continuous atmospheric displacement:
- Continuous Clean Air Intake: The loft fan draws fresh, naturally tempered air from the ventilated roof space through high-efficiency ePM10 particulate filters.
- Whole-House Overpressurisation: Dry air is gently discharged through a central ceiling diffuser, creating a continuous positive pressure differential of 2 to 5 Pascals throughout the dwelling.
- Soil Gas Suppression: This positive pressure equalises or exceeds the soil suction pressure, preventing radon gas from rising through suspended timber floors and concrete slab perimeters.
- Dilution & Displacement: Any residual airborne radon atoms are continuously diluted and forced out through natural background ventilation gaps, window trickle vents, and extraction grilles.
⚡ Electricity Cost Check:
Wondering how much continuous PIV ventilation adds to your electricity bill? Use our free Dehumidifier & PIV Running Cost Calculator based on the latest 2026 Ofgem energy cap.
PIV Unit vs Active Radon Sump: Cost & Performance Comparison
| Remediation Method | Average Turnkey Cost | Radon Reduction Rate | Structural Invasiveness | Secondary Benefits |
|---|---|---|---|---|
| Loft-Mounted PIV Unit | £600 – £950 | 40% – 70% Reduction | Low (1 ceiling diffuser cut) | Cures condensation, mould & dust mites |
| Active Radon Sump (Fan + Pipe) | £1,500 – £3,200 | 85% – 98% Reduction | High (Drilling slab & external walls) | Radon mitigation only (No indoor air benefits) |
| Passive Subfloor Vents | £300 – £600 | 10% – 30% Reduction | Moderate (Replacing air bricks) | Reduces subfloor joist moisture |
When is a PIV Unit Recommended for Radon Remediation?
Under UK building standards and BRE guidelines, PIV is the primary recommended remediation method when:
- Radon Levels Range Between 200 and 500 Bq/m³: PIV typically brings radon concentrations down well below the UK Target Level of 100 Bq/m³.
- The Property Has a Suspended Timber Ground Floor: Retrofitting subfloor sumps through timber joists is expensive and technically challenging; PIV treats the entire living envelope from the attic space.
- Dual Moisture and Radon Issues: Properties suffering from both winter condensation mould and elevated soil gas achieve complete remediation with a single equipment installation.
To compare leading hardware specifications, consult our Nuaire Drimaster vs EnviroVent Comparison Guide and our foundational Whole-House PIV Installation Cost Review. For apartments without a roof void, read our Wall-Mounted PIV Guide for Flats.